Queo 8203 is an ethylene based octene-1 plastomer, produced in a solution polymerisation process using a metallocene catalyst.
CAS-No. 26221-73-8
Applications
Queo 8203 Demonstrated applications include: Specialty stretch film applications High strength flexible films Roof coverings Impact modification of PP Tunnel linings Extrusion coating Flexible low voltage insulation Halogen free flame retardant compounds Blow moulding Soft foams, e.g. artificial wine corks
Additives
Queo 8203 contains processing stabilizers
Special Features
Queo 8203 is optimised to deliver: High melt strength - processability balance Outstanding toughness Outstanding puncture resistance Low temperature impact strength High flexibility and surface softness High clarity filler and oil acceptance Low temperature flex-cracking and impact resistance Low dielectric constant and dissipation factor
| Original Document | Technical Datasheet-ISO(English) Summary Data Sheets-Queo™(English) | |||
| Features | High Impact at Low TemperaturGood FlexibilityHigh melt strengthSoft | |||
| Additive | Processing Aid | |||
| Processing | Film ExtrusionWire & Cable ExtrusionCompounding | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Melt Mass Flow Rate(MFR) | |||
190℃/2.16 kg | *** g/10min | ISO 1133 | |
Environmental Stress Cracking Resistance | *** Hours | ASTM D 1693 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** Mpa | ISO 527-2 | |
Tensile Elongation | |||
Break | *** % | ISO 527-2 | |
Flexural Modulus | *** Mpa | ISO 178 | |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Izod Notched Impact Strengh | |||
23℃ (73℉) | *** kJ/m² | ISO 180/1A | |
Brittleness Temperature | *** °C | ASTM D 746 | |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore A hardness | *** A | ISO 868 | |
Shore D hardness | *** D | ISO 868 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Vicat Softening Temperature(VST) | *** °C | ISO 306 | 10 N |
Melt Temperature(Tm) | *** °C | ISO 11357-3 | DSC |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
