Queo 8201 is an ethylene based octene-1 plastomer, produced in a solution polymerisation process using a metallocene catalyst.
CAS-No. 26221-73-8
Applications
Queo 8201 Demonstrated applications include: Specialty stretch film applications High strength flexible films Roof coverings Impact modification of PP Tunnel linings Flexible low voltage insulation Halogen free flame retardant compounds Blow moulding Soft foams, e.g. artificial wine corks
Additives
Queo 8201 contains processing stabilizers
Special Features
Queo 8201 is optimised to deliver: Versatile blending with other polyolefins in film, extrusion and moulding applications. Bridging of plastic and elastomeric properties Outstanding toughness Outstanding puncture resistance Low temperature impact strength High filler and oil acceptance High clarity Low temperature flex-cracking and impact resistance
| Original Document | Technical Datasheet-ISO(English) Summary Data Sheets-Queo™(English) | |||
| Features | High Impact at Low TemperaturFlame RetardantHalogen FreeNoise Damping | |||
| Additive | Processing Aid | |||
| Processing | Film ExtrusionWire & Cable ExtrusionCompounding | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Melt Mass Flow Rate(MFR) | |||
190℃/2.16 kg | *** g/10min | ISO 1133 | |
Environmental Stress Cracking Resistance | *** Hours | ASTM D 1693 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** Mpa | ISO 527-2 | |
Tensile Elongation | |||
Break | *** % | ISO 527-2 | |
Flexural Modulus | *** Mpa | ISO 178 | |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Izod Notched Impact Strengh | |||
23℃ (73℉) | *** kJ/m² | ISO 180/1A | |
Brittleness Temperature | *** °C | ASTM D 746 | |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore A hardness | *** A | ISO 868 | |
Shore D hardness | *** D | ISO 868 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Vicat Softening Temperature(VST) | *** °C | ISO 306 | 10 N |
Melt Temperature(Tm) | *** °C | ISO 11357-3 | DSC |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
