Queo 0203 is an ethylene based octene-1 plastomer, produced in a solution polymerisation process using a metallocene catalyst.
CAS-No. 26221-73-8
Applications
Queo 0203 Demonstrated applications include: Seal layers in lamination and flexible barrier films Specialty cast stretch applications Lap sealing to OPP PP film toughness modification High clarity household articles Halogen free flame retardant compounds Soft foams, e.g. artificial wine corks
Additives
Queo 0203 contains processing stabilizers
Special Features
Queo 0203 is optimised to deliver: Versatile blending with other polyolefins in film, extrusion and moulding applications. Unrivalled sealing and hot tack properties at low temperature Flexibility Outstanding toughness Outstanding puncture resistance Low temperature impact strength High clarity
| Original Document | Technical Datasheet-ISO(English) Summary Data Sheets-Queo™(English) | |||
| Features | High Impact at Low TemperaturGood FlexibilityFlame RetardantHalogen Free | |||
| Additive | Processing Aid | |||
| Processing | ExtrusionFilm ExtrusionCompounding | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Melt Mass Flow Rate(MFR) | |||
190℃/2.16 kg | *** g/10min | ISO 1133 | |
Environmental Stress Cracking Resistance | *** Hours | ASTM D 1693 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** Mpa | ISO 527-2 | |
Tensile Elongation | |||
Break | *** % | ISO 527-2 | |
Flexural Modulus | *** Mpa | ISO 178 | |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Izod Notched Impact Strengh | |||
23℃ (73℉) | *** kJ/m² | ISO 180/1A | |
Brittleness Temperature | *** °C | ASTM D 746 | |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore D hardness | *** D | ISO 868 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Vicat Softening Temperature(VST) | *** °C | ISO 306 | 10 N |
Melt Temperature(Tm) | *** °C | ISO 11357-3 | DSC |
| Optical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Haze | *** % | ASTM D1003 | |
Gloss | *** - | ASTM D 2457 | 45 °C |
| Film | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ASTM D 882 | |
Piercing strength | *** J/m | Internal | |
Dart Drop Impact | *** g/µm | ASTM D 1709 | |
Seal Initiation Temperature | *** ℃ | ASTM F88 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
