Daplen EG107HP is a mineral filled elastomer modified high performance polypropylene compound intended for injection moulding.
This material has a very good balance between impact strength and stiffness and gives an excellent surface quality.
Applications
Daplen EG107HP has been developed especially for applications like: Bumpers Rocker panels Body side mouldings Body panels
Special Features
Excellent scratch resistance Available with and without UV-stabilisation Excellent surface appearance on unpainted parts
| Original Document | Technical Datasheet-ISO(English) Summary Data Sheets-Automotive(English) | |||
| Features | Good StiffnessGood Impact ResistanceGood SurfaceAnti-ScratchFilled & Reinforced | |||
| Processing | Injection | |||
| Reinforced | MineralElastomer | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Melt Mass Flow Rate(MFR) | |||
230°C/2.16 kg | *** g/10min | ISO 1133 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** Mpa | ISO 527-2 | 50 mm/min |
Flexural Modulus | *** Mpa | ISO 178 | 2 mm/min |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
-20℃ (-4℉) | *** kJ/m² | ISO 179/1eA | |
23℃ (73℉) | *** kJ/m² | ISO 179/1eA | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ISO 75-2 | |
Coefficient of Linear Thermal Expansion | |||
- | *** E-6/K | Internal | -30 °C/80 °C |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
