Daplen EE250AI is a mineral filled elastomer modified high performance polypropylene compound intended for injection moulding.
This material has a very good balance between impact strength and stiffness and gives an excellent quality.
Applications
Daplen EE250AI has been developed especially for the car industry to be used in automotive interior parts. Door panels and pockets Window frames Center consoles Other automotive interior parts
Special Features
High scratch resistance No tendency to show stickiness after outdoor exposure
| Original Document | Technical Datasheet-ISO(English) Summary Data Sheets-Automotive(English) | |||
| Features | Good StiffnessGood Impact ResistanceAnti-ScratchFilled & Reinforced | |||
| Processing | Injection | |||
| Reinforced | MineralElastomer | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Melt Mass Flow Rate(MFR) | |||
230°C/2.16 kg | *** g/10min | ISO 1133 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** Mpa | ISO 527 | 50 mm/min |
Flexural Modulus | *** Mpa | ISO 178 | 2 mm/min |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
-20℃ (-4℉) | *** kJ/m² | ISO 179/1eA | |
23℃ (73℉) | *** kJ/m² | ISO 179/1eA | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ISO 75 | |
| Additional Information | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Fogging | |||
- | *** mg | DIN 75201 | 100 °C,16 h |
Volatile Organic Compounds | *** µgC/g | VDA 277 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
