Casico FR4802 is a thermoplastic, low smoke zero halogen (LSZH) flame retardant, natural jacketing and insulation compound combining with excellent extrusion properties. The composition is based on the elements Carbon, Hydrogen, Oxygen, Silicon and Calcium. Compounds based on these elements will therefore be the only significant constituents of the combustion fumes. Other elements may be present in concentrations less than 0.1%.
Specifications
Casico FR4802 meets the applicable requirements below using sound commercial extrusion practice and testing procedures: ASTM D 1248 Type I, Class A, Category 4 ISO 1872-PE KGHN-23D006
The following cable material standards are met by Casico FR4802: EN 50290-2-27 EN 50290-2-26 EN 50363-8 TM7 BS 7655 LTS2 EN 50363-7 TI6 & TI7 VDE 0207 Teil 23 (HI2) and Teil (HM2, HM4 & HM5)
Cables manufactured with Casico FR4802 using sound extrusion practice normally comply with the following cable product standards: BS 7211 IEC 60502 Part 1 ST3
| Original Document | Technical Datasheet-ISO(English) | |||
| Features | Halogen FreeInsulatingLow Smoke Density | |||
| Processing | Wire & Cable Extrusion | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Melt Mass Flow Rate(MFR) | |||
190℃/2.16 kg | *** g/10min | ISO 1133 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** Mpa | ISO 527-2 | 50 mm/min |
Tensile Elongation | |||
Break | *** % | ISO 527-2 | 50 mm/min |
Flexural Modulus | *** Mpa | ISO 178 | |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Brittleness Temperature | *** °C | ISO 974 | |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore D hardness | *** D | ISO 868 | 15 s |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Oxygen Index | *** % | ISO 4589 | |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Volume Resistivity | *** Ohm-cm | IEC 60093 | |
Dielectric Strength | *** kV/mm | IEC 60243 | |
Insulation Resistance | *** Ohm | Internal | |
| Aging | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength(Heat Aging) | *** % | IEC 60811-401 | Change, 10 d, 100 °C |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
