Borstar HE6063 is a natural, UV-stabilised, colourable, bimodal high density (HD) jacketing compound, which is produced with the Borealis proprietary Borstar bimodal process technology.
Borstar technology allows the manufacturing of polymers outside the traditional MFR and density range making it possible to optimize processability, reduce shrinkage and yet provide excellent physical toughness and environmental stress crack resistance (ESCR).
Borstar HE6063 contains a well dispersed UV-stabiliser in sufficient amount providing a measure of weathering resistance.\'20 In order to fully utilise the unique low shink properties of Borstar HE6063 we recommend the use of non-warping colour masterbatches.
Applications
Borstar HE6063 is designed for jacketing of energy and communication cables. The physical toughness and very low water permeability of the compound make it an ideal solution especially for buried power cables. Borstar HE6063 offers a balance of properties giving advantages in manufacturing, installation and lifetime performance of communication and energy cables.
Specifications
Borstar HE6063 meets the applicable requirements as below when processed using sound extrusion practice and testing procedure: ISO 1872-PE, KHLN, 45 D-006 ASTM D 1248 Type III, Class A, Category 4, Grade E9, J5
The following cable material standards are met by Borstar HE6063: EN 50290-2-24 DMP 5, 6, 13, 16
Cables manufactured with Borstar HE6063 using sound extrusion practice normally comply with the following cable product standards: IEC 60502, Part 2, Type ST7 IEC 60840, Type ST7 IEC 60794 EN 187105 HD 603 S1, DMP 6 DIN VDE 0818 HD 620 S2, Part 1, table 4B, DMP 5, 13, 16, 18
Special Features
Borstar HE6063 consists of specially selected components to offer: Superior processability Excellent environmental stress cracking resistance (ESCR) Excellent abrasion & scratch resistance Low water permeability Low heat deformation Good petroleum-jelly resistance Termite resistance Very good UV resistance Low shrinkage Excellent surface hardness
| Original Document | Technical Datasheet-ISO(English) | |||
| Features | Good SurfaceWear/Abrasion ResistanceAnti-ScratchEasy processingUV StabiltiyWeather ResistanceESCR | |||
| Additive | UV-Stabilizer | |||
| Appearance | Colors AvailableNatural Color | |||
| Processing | Wire & Cable Extrusion | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Melt Mass Flow Rate(MFR) | |||
190℃/2.16 kg | *** g/10min | ISO 1133 | |
190℃/5 kg | *** g/10 min | ISO 1133 | |
Environmental Stress Cracking Resistance | *** Hours | IEC 60811-406 | 50 °C, Igepal 10 %, F0 |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** Mpa | ISO 527-2 | 50 mm/min |
Tensile Elongation | |||
Break | *** % | ISO 527-2 | 50 mm/min |
Flexural Modulus | *** Mpa | ISO 178 | |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Brittleness Temperature | *** °C | ASTM D 746 | |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore D hardness | *** D | ISO 868 | 1 s |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Volume Resistivity | *** Ohm-cm | IEC 60093 | |
Dielectric Strength | *** kV/mm | IEC 60243 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
