Borstar FB4230 is a linear low density polyethylene film grade combining good and flexible extrusion behaviour, excellent draw down and superior mechanical properties.
Blown film extrusion with Borstar LLDPE is comparable to LDPE, but with better flexibility in film thickness range and draw down.
Applications
Borstar FB4230 has been developed especially for applications like: Food packaging Pouches General packaging Frozen food packaging
Additives
Borstar FB4230 contains antioxidant.
| Original Document | Technical Datasheet-ISO(English) | |||
| Additive | Antioxidant | |||
| Processing | Film Extrusion | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Melt Mass Flow Rate(MFR) | |||
190℃/2.16 kg | *** g/10min | ISO 1133 | |
190℃/5 kg | *** g/10 min | ISO 1133 | |
190℃/21.6 kg | *** g/10 min | ISO 1133 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Coefficient of Friction | *** - | ISO 8295 | Dynamic |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Melt Temperature(Tm) | *** °C | ISO 11357-3 | DSC |
| Optical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Haze | *** % | ASTM D1003 | |
Gloss | *** - | ASTM D 2457 | 20 degree |
| Film | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** Mpa | ISO 527-3 | MD |
- | *** Mpa | ISO 527-3 | TD |
Tensile Elongation | |||
Break | *** % | ISO 527-3 | MD |
Break | *** % | ISO 527-3 | TD |
Tensile Modulus | *** Mpa | ISO 527-3 | MD |
Tensile Modulus | *** Mpa | ISO 527-3 | TD |
Elmondorf Tear | *** N | ISO 6383-2 | MD |
Elmondorf Tear | *** N | ISO 6383-2 | TD |
Dart Drop Impact | *** g | ISO 7765-1 | |
Dart Drop Impact | *** J/mm | ISO 7765-2 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
