BorSafe™ ME3441 is a bimodal polyethylene compound produced by the advanced Borstar technology.
It is a readymade compound, including a carefully selected combination of pigments and stabilizers to ensure excellent long-term thermal stability and UV-resistance for limited outdoors storage of the final product.
BorSafe ME3441 is classified as an MRS 8.0 material (PE80).
Applications
BorSafe ME3441 is recommended for pressure pipe systems in the applications field of: Natural gas
Specifications
BorSafe ME3441 is intended to fulfill following International standards, when appropriate industrial manufacturing standard procedures are applied and a continuous quality system is implemented. EN 1555 / ISO 4437 1
The material shows excellent mechanical toughness and crack resistance also at lower temperatures. Thanks to the molecular structure, it offers outstanding extrudability and good melt strength, supporting a problem-free extrusion process to tight tolerances.
| Original Document | Technical Datasheet-ISO(English) | |||
| Features | Heat StabilizedUV Stabiltiy | |||
| Additive | UV-StabilizerHeat Stabilizer | |||
| Appearance | Yellow | |||
| Processing | ExtrusionTube Extrusion | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Melt Mass Flow Rate(MFR) | |||
190℃/5 kg | *** g/10 min | ISO 1133 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ISO 527-2 | 1 mm/min |
Tensile Strength | |||
Yield | *** Mpa | ISO 527-2 | 50 mm/min |
Tensile Elongation | |||
Break | *** % | ISO 527-2 | |
Resistance to slow crack growth | *** hr | ISO 13479 | 8 bar, 80 °C |
| Additional Information | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Oxidative Induction Time | *** Min | EN 728 | 210 °C |
Minimum Required Strength(MRS) | *** MPa | - |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
