BorSafe ME3440-D is a bimodal polyethylene compound produced by the advanced Borstar technology.
BorSafe ME3440-D is classified as an MRS 8.0 material (PE80).
Applications
BorSafe ME3440-D is recommended for pressure pipe systems in the applications field of: Drinking water Industrial Relining
Particularly where flexibility and coilability is of importance. It also shows excellent resistance to rapid crack propagation and slow crack growth. Thanks to the structure, it gives outstanding extrudability, compared to conventional PE80. It also exhibits an improved resistance to chlorinated water disinfectants.
| Original Document | Technical Datasheet-ISO(English) | |||
| Processing | Extrusion | |||
| Reinforced | 2~2.5% Carbon black | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | Compound |
Melt Mass Flow Rate(MFR) | |||
190℃/5 kg | *** g/10 min | ISO 1133 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ISO 527-2 | 1 mm/min |
Tensile Strength | |||
Yield | *** Mpa | ISO 527-2 | 50 mm/min |
Tensile Elongation | |||
Break | *** % | ISO 527-2 | |
Resistance to rapid crack propagation | *** bar | ISO 13477 | S4 test, Pc at 0 °C, Test pipe 250 mm, SDR11 |
Resistance to slow crack growth | *** hr | ISO 13479 | 8 bar, 80 °C |
| Additional Information | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Oxidative Induction Time | *** Min | EN 728 | 210 °C |
Minimum Required Strength(MRS) | *** MPa | - |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
