BorSafe HE3494-LS-H is a bimodal polyethylene compound produced by the advanced Borstar technology.
It includes a combination of pigments and stabilisers to ensure excellent long-term thermal stability and UVresistance.
BorSafe HE3494-LS-H is classified as an MRS 10.0 material (PE100).
Applications
BorSafe HE3494-LS-H is recommended for: Drinking water It is especially designed for the production of larger diameter, thick wall pipe, but can be processed for the whole range of diameters.
Special features
BorSafe HE3494-LS-H is a high density hexene copolymer compound with an oustanding resistance to slow crack growth.
| Original Document | Technical Datasheet-ISO(English) | |||
| Features | Drinking Water ContactUV Stabiltiy | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | Base Resin |
Density/Specific Gravity | *** g/cm³ | ISO 1183 | Compound |
Melt Mass Flow Rate(MFR) | |||
190℃/5 kg | *** g/10 min | ISO 1133 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ISO 527-2 | 1 mm/min |
Tensile Strength | |||
Yield | *** Mpa | ISO 527-2 | 50 mm/min |
Tensile Elongation | |||
Break | *** % | ISO 527-2 | |
Resistance to rapid crack propagation | *** bar | ISO 13477 | S4 test, Pc at 0 °C, Test pipe 250 mm, SDR11 |
Resistance to slow crack growth | *** hr | ISO 13479 | 9,2 bar, 80 °C |
| Additional Information | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Oxidative Induction Time | *** Min | EN 728 | 200 °C |
Minimum Required Strength(MRS) | *** MPa | - |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
