BorSafe HE3490-LS-H is a bimodal polyethylene compound produced by the advanced Borstar technology.
The product contains a combination of pigments and stabilizers to ensure excellent long-term stability and UVresistance.
BorSafe HE3490-LS-H is classified as an MRS 10.0 material (PE100).
Applications
BorSafe HE3490-LS-H is recommended for pressure pipe systems in the applications field of: Drinking water Corrugated pipes Relining Sheets and profiles Industrial Gas distribution Glass fibre ducts Cable protection pipes
Specifications
BorSafe HE3490-LS-H is intended to fulfill following International standards, when appropriate industrial manufacturing standard procedures are applied and a continuous quality system is implemented. EN 12201 EN 1555 EN ISO 15494 ISO 4427 ISO 4437
The product is a high-density hexene copolymer compound with an outstanding resistance to slow crack growth and used for non-conventional pipe installation technologies, like No Dig. It shows excellent resistance to rapid crack propagation. It is especially designed for the production of larger diameter, thick wall pipe, but can be processed for the whole range of diameters.
BorSafe HE3490-LS-H is tested in accordance with PAS 1075 and is PE100-RC classified.
| Original Document | Technical Datasheet-ISO(English) | |||
| Features | UV Stabiltiy | |||
| Appearance | Black | |||
| Processing | ExtrusionTube Extrusion | |||
| Reinforced | 2~2.5% Carbon black | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | Compound |
Melt Mass Flow Rate(MFR) | |||
190℃/5 kg | *** g/10 min | ISO 1133 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ISO 527-2 | 1 mm/min |
Tensile Strength | |||
Yield | *** Mpa | ISO 527-2 | 50 mm/min |
Tensile Elongation | |||
Break | *** % | ISO 527-2 | 50 mm/min |
Resistance to rapid crack propagation | *** bar | ISO 13477 | S4 test, Pc at 0 °C, Test pipe 250 mm, SDR11 |
| Additional Information | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Oxidative Induction Time | *** Min | EN 728 | 210 °C |
Minimum Required Strength(MRS) | *** MPa | - |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
