AjiENG.com

Aji New Material (Qingdao) Co.,LTD

No.47 Huadingshan Road, Qingdao City, Shandong Province, China.
Tel: +86 532 86871530
Email: info@ajieng.com

BorSafe™ HE3470-LS

PE, HDPE

Borouge/Borealis AG

Product Description

BorSafe HE3470-LS is a bimodal polyethylene compound produced by the advanced Borstar technology. 

Well dispersed carbon black gives outstanding UV resistance. Long term stability is ensured by an optimised  stabilisation system. 

BorSafe HE3470-LS is classified as an MRS 8.0 material (PE80). 


Applications 

BorSafe HE3470-LS is recommended for pressure pipe systems in the applications field of: 

   Drinking water Natural gas Pressure sewerage Industrial Relining Sea outfall  

It is especially designed for the production of larger diameter, thick wall pipe, but can be processed for the whole  range of diameters. It also shows excellent resistance to rapid crack propagation and slow crack growth.

General
Original Document
Technical Datasheet-ISO(English)
Features
UV Stabiltiy
Processing
Tube Extrusion
Reinforced
2% Carbon black
Specifications
Physical Value/Unit(Sign in to View) Test Standard Test Condition

Density/Specific Gravity

*** g/cm³ ISO 1183
Compound

Melt Mass Flow Rate(MFR)

190℃/5 kg

*** g/10 min ISO 1133
Mechanical Value/Unit(Sign in to View) Test Standard Test Condition

Tensile Modulus

*** Mpa ISO 527-2
1 mm/min

Tensile Strength

Yield

*** Mpa ISO 527-2
50 mm/min

Tensile Elongation

Break

*** % ISO 527-2

Resistance to rapid crack propagation

*** bar ISO 13477
S4 test, Pc at 0 °C, Test pipe 250 mm, SDR11

Resistance to slow crack growth

*** hr ISO 13479
8 bar, 80 °C
Additional Information Value/Unit(Sign in to View) Test Standard Test Condition

Oxidative Induction Time

*** Min EN 728
200 °C

Minimum Required Strength(MRS)

*** MPa -

The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.