Borlink LS4201H is a crosslinkable natural polyethylene compound based on Supercure technology, specially designed for insulation of power cables.
Applications
Borlink LS4201H is intended for insulation of XLPE high voltage (HV) AC cables with rated voltages up to 161 kV (Um = 170 kV).
The values are voltages between phases as defined in IEC 60183.
Specifications
Borlink LS4201H is expected to meet the applicable requirements included in the below mentioned standards provided it is processed using sound material handling, extrusion and crosslinking practices as well as appropriate testing procedures. This applies up to the maximum recommended voltage level indicated in "Applications" section above since some standards cover wider voltage ranges.
IEC 60840 AEIC CS9 AEIC CS8 ANSI/ICEA S-108-720 ANSI/ICEA S-93-639 ANSI/ICEA S-94-649 ANSI/ICEA S-97-682 Cenelec HD 632 S1 UL 1072
| Original Document | Technical Datasheet-ISO(English) | |||
| Features | InsulatingCrosslinkable | |||
| Appearance | Natural Color | |||
| Processing | ExtrusionWire & Cable Extrusion | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | Base Resin |
Melt Mass Flow Rate(MFR) | |||
190℃/2.16 kg | *** g/10min | ISO 1133 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** Mpa | ISO 527 | 250 mm/min |
Tensile Elongation | |||
Break | *** % | ISO 527 | 250 mm/min |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Melt Temperature(Tm) | ***~*** °C | Internal | |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Volume Resistivity | *** Ohm-cm | IEC 60093 | 23 °C |
Dielectric Constant(Permittivity) | |||
50 Hz | *** - | IEC 60250 | |
Dissipation Factor | |||
50 Hz | *** E-4 | IEC 60250 | |
| Aging | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength(Heat Aging) | *** % | IEC 60811-401 | Change, 168 h, 135 °C |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
