Borlink LE0310-04 is a crosslinkable black polyethylene compound, specially designed for semiconductive strippable insulation shield of power cables.
Applications
Borlink LE0310-04 is indented for semiconductive strippable insulation shield in medium voltage (MV) AC cables with rated voltages up to 46 kV.
The values are voltages between phases as defined in ICEA S-94-649.
Specifications
Borlink LE0310-04 is expected to meet the applicable requirements included in the below mentioned standards provided it is processed using sound material handling, extrusion and crosslinking practices as well as appropriate testing procedures. This applies up to the maximum recommended voltage level indicated in "Applications" section above since some standards cover wider voltage ranges. IEC 60502-2 AEIC CS8 ANSI/ICEA S-93-639 ANSI/ICEA S-94-649 ANSI/ICEA S-97-682 UL 1072
Special Features
Borlink LE0310-04 is a ready-to-use semiconductive compound. It provides very low strip forces when used over Borealis crosslinkable polyethylene insulation compounds.
The excellent distribution of carbon black and additives in Borlink LE0310-04 results in a smooth semiconductive shield.
| Original Document | Technical Datasheet-ASTM(English) | |||
| Features | Semi conductiveCrosslinkable | |||
| Appearance | Black | |||
| Processing | ExtrusionWire & Cable Extrusion | |||
| Reinforced | Carbon black | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | 23 °C |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** Mpa | ASTM D 638 | 510 mm/min |
Tensile Elongation | |||
Break | *** % | ASTM D638 | 510 mm/min |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Brittleness Temperature | *** °C | ASTM D 746 | |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Volume Resistivity | *** Ohm-cm | ASTM D 991 | 23 °C |
Volume Resistivity | *** Ohm-cm | ASTM D 991 | 90 °C |
| Aging | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength(Heat Aging) | *** % | ASTM D638 | Retention, 168 h, 121 °C |
Elonggation(Heat Aging) | *** % | ASTM D638 | 168 h, 121 °C |
| Additional Information | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Adhesion Strength | *** N/mm | - | Cable Strip Force (90° peel) |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
