Borlink LC8205R is a crosslinkable natural polyethylene compound based on Supercure technology, specially designed for insulation of power cables.
Applications
Borlink LC8205R is intended for insulation of XLPE medium voltage (MV) AC cables with rated voltages up to 69 kV (Um = 72,5 kV). It is designed for cable constructions with bonded insulation screens.
The values are voltages between phases as defined in IEC 60183.
Specifications
Borlink LC8205R is expected to meet the applicable requirements included in the below mentioned standards provided it is processed using sound material handling, extrusion and crosslinking practices as well as appropriate testing procedures. This applies up to the maximum recommended voltage level indicated in "Applications" section above since some standards cover wider voltage ranges. IEC 60840 IEC 60502-2 DIN VDE 0276-620 Cenelec HD 620 S2 (Part 1) GOSTR 55025-2012 UL 1072
Special Features
Borlink LC8205R is a ready-to-use natural co-polymer compound. It provides superior electrical performance (polymer WTR XLPE) meeting the most stringent wet ageing requirements. It offers excellent scorch resistance, long production runs and high line speed potential. Borlink LC8205R cleanliness level is assured through the Borealis quality management system.
| Original Document | Technical Datasheet-ISO(English) | |||
| Features | InsulatingCrosslinkable | |||
| Appearance | Natural Color | |||
| Processing | Extrusion | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | Base Resin |
Melt Mass Flow Rate(MFR) | |||
190℃/2.16 kg | *** g/10min | ISO 1133 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** Mpa | ISO 527-2 | 250 mm/min |
Tensile Elongation | |||
Break | *** % | ISO 527-2 | 250 mm/min |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Volume Resistivity | *** Ohm-cm | IEC 62631-3-1 | |
Dielectric Constant(Permittivity) | |||
50 Hz | *** - | IEC 60250 | |
Dissipation Factor | |||
50 Hz | *** E-4 | IEC 60250 | |
| Aging | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength(Heat Aging) | *** % | IEC 60811-401 | Change, 168 h, 135 °C |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
