BorECO™BA415E is a high molecular weight, low melt flow rate polypropylene block copolymer with high stiffness and impact strength.
This material has been designed for improved processablility and higher output, especially in the production of corrugated pipes.
Applications
BorECO™BA415E is recommended for solid wall and structured wall non-pressure gravity pipes, profiles, fittings and chambers in the application field of: Underground drainage Sewerage Soil Waste
| Original Document | Technical Datasheet-ISO(English) | |||
| Features | Easy processing | |||
| Processing | Tube Extrusion | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Melt Mass Flow Rate(MFR) | |||
230°C/2.16 kg | *** g/10min | ISO 1133 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Yield | *** Mpa | ISO 527-2 | 50 mm/min |
Tensile Elongation | |||
Yield | *** % | ISO 527-2 | 50 mm/min |
Flexural Modulus | *** Mpa | ISO 178 | |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
-20℃ (-4℉) | *** kJ/m² | ISO 179 | |
23℃ (73℉) | *** kJ/m² | ISO 179 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
