Borcoat ME0420 is a maleic anhydride grafted polyethylene adhesive.
The product is non-pigmented and supplied in pellet form.
Applications
Borcoat ME0420 is recommended as an adhesive for a three layer PE system used in: Steel Pipe Coating
Specifications
Borcoat ME0420 is intended to fulfil following National and International standards, when appropriate industrial manufacturing standard procedures are applied and a continuous quality system is implemented and when used in combination with Borcoat HE3450, HE3450-H or HE3453 and a compatible Fusion Bonded Epoxy(FBE) powder. EN ISO 21809-1 DIN 30670 NF A49-710 CAN/CSA-Z245.21
Special Features
Borcoat ME0420 is intended to be used as an adhesive for PE three layer systems at design temperatures between -40°C up to +90°C.
| Original Document | Technical Datasheet-ISO(English) | |||
| Features | Good Adhesion | |||
| Appearance | Pellets/Granules | |||
| Processing | ExtrusionCoating | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Melt Mass Flow Rate(MFR) | |||
190℃/2.16 kg | *** g/10min | ISO 1133 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Yield | *** Mpa | ISO 527-2 | 50 mm/min |
Break | *** Mpa | ISO 527-2 | 50 mm/min |
Tensile Elongation | |||
Break | *** % | ISO 527-2 | 50 mm/min |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Brittleness Temperature | *** °C | ASTM D 746 | |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore D hardness | *** D | ISO 868 | 1 s |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Vicat Softening Temperature(VST) | *** °C | ISO 306/A50 | 10 N |
Melt Temperature(Tm) | *** °C | ISO 11357-3 | DSC |
| Additional Information | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Oxidative Induction Time | *** Min | ISO 11357 | 200 °C |
Adhesion Strength | *** N/mm | ISO 21809-1 | 3 layer, 23 °C |
Adhesion Strength | *** N/mm | ISO 21809-1 | 3 layer, 80 °C |
Adhesion Strength | *** N/mm | ISO 21809-1 | 3 layer, 90 °C |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
