FT5230 is a Low Density Polyethylene for Film Extrusion. Tubular Technology. Unmodified.
This grade is developed for the production of packaging film with good optical properties for medium duty film applications.
CAS-No. 9002-88-4
Applications
FT5230 has been developed especially for applications like: Shrink film Carrier-bag film Pouches Lamination films Food packaging
Additives FT5230 contains no additives.
| Original Document | Technical Datasheet-ISO(English) | |||
| Processing | Film Extrusion | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Melt Mass Flow Rate(MFR) | |||
190℃/2.16 kg | *** g/10min | ISO 1133 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Coefficient of Friction | *** - | ISO 8295 | Dynamic |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Melt Temperature(Tm) | *** °C | ISO 11357-3 | DSC |
| Optical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Haze | *** % | ASTM D1003 | |
Gloss | *** - | ASTM D 2457 | 20 degree |
| Film | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** Mpa | ISO 527-3 | MD |
- | *** Mpa | ISO 527-3 | TD |
Tensile Elongation | |||
Break | *** % | ISO 527-3 | MD |
Break | *** % | ISO 527-3 | TD |
Tensile Modulus | *** Mpa | ASTM D 882 | MD |
Tensile Modulus | *** Mpa | ASTM D 882 | TD |
Puncture resistance | *** J | ISO 6603-2 | |
Elmondorf Tear | *** N | ISO 6383-2 | MD |
Elmondorf Tear | *** N | ISO 6383-2 | TD |
Dart Drop Impact | *** g | ISO 7765-1 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
