FR4847 is a Polyethylene Based Striping Compound for Primary Automotive Wires.
FR4847 is designed and manufactured with advanced material and processing technology to provde enhanced stabilization and lower particulate matter. This compound was designed to have high compatability with our chemically crosslinkable non-halogen flame retardant insulation compounds.
APPLICATION:
FR4847 is intended for use as non-halogen flame retardant polyethylene compound in striping applications for primary automotive wires. It would be used in conjunction with our chemically crosslinkable nonhalogen flame retardant insulation compounds.
| Original Document | Technical Datasheet-ASTM(English) | |||
| Features | Flame RetardantHalogen FreeCrosslinkable | |||
| Processing | ExtrusionWire & Cable Extrusion | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** Mpa | ASTM D 412 | |
Tensile Elongation | |||
Break | *** % | ASTM D 412 | |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore D hardness | *** D | ASTM D 2240 | |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Volume Resistivity | *** Ohm-cm | ASTM D257 | |
Dielectric Constant(Permittivity) | |||
60 Hz | *** - | ASTM D 150 | 23 °C |
Dissipation Factor | |||
60 Hz | *** E-4 | ASTM D 150 | 23 °C |
Dielectric Strength | *** kV/mm | ASTM D149 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
