FR4832 is a Chemically Crosslinkable Polyethylene Compound for Primary Automotive Wires.
Applications
FR4832 is intended for use as a 125º C rated primary insulation for crosslinked automotive wire.
Specifications
FR4832 in combination meets the applicable requirements as below when processed using sound extrusion and testing procedure: SAE J1128/J1127
| Original Document | Technical Datasheet-ASTM(English) | |||
| Features | Insulating | |||
| Processing | ExtrusionWire & Cable Extrusion | |||
| Compliance | SAE J1128 | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** Mpa | ASTM D 412 | |
Tensile Elongation | |||
Break | *** % | ASTM D 412 | |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Brittleness Temperature | *** °C | ASTM D 746 | |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore D hardness | *** D | ASTM D 2240 | |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Oxygen Index | *** % | ASTM D 2863 | |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Volume Resistivity | *** Ohm-cm | ASTM D257 | |
Dielectric Constant(Permittivity) | |||
60 Hz | *** - | ASTM D 150 | 23 °C |
Dissipation Factor | |||
60 Hz | *** E-4 | ASTM D 150 | 23 °C |
Dielectric Strength | *** kV/mm | ASTM D149 | |
| Aging | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength(Heat Aging) | *** % | - | Retention, 168 h, 165 °C |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
