Fibremod WE380HP is a high performance hybrid reinforced (20% glass fibre / 10% mineral) copolypropylene compound intended for injection moulding.
This material has an excellent balance between impact strength and stiffness combined with outstanding processability.
The product is available in standard black 9502. The product is available in natural colour.
Applications
Fibremod WE380HP has been developed especially for applications like:
Engine covers
Gear housings
Airbag containers
Special Features
Excellent flowability
Excellent impact behaviour
Excellent surface appearance
| Original Document | Technical Datasheet-ISO(English) Summary Data Sheets-Automotive(English) | |||
| Features | Good StiffnessGood Impact ResistanceGood SurfaceEasy processingGood FlowFilled & Reinforced | |||
| Appearance | Natural ColorBlack | |||
| Processing | Injection | |||
| Reinforced | 20% Glass Fiber10% Mineral30% Glass Fiber+Minal | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Melt Mass Flow Rate(MFR) | |||
230°C/2.16 kg | *** g/10min | ISO 1133 | |
Spiral Flow | *** mm | - | 230°C, 40°C, 600bar |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ISO 527 | 1 mm/min |
Tensile Strength | |||
- | *** Mpa | ISO 527 | 50 mm/min |
Flexural Modulus | *** Mpa | ISO 178 | 2 mm/min |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
-20℃ (-4℉) | *** kJ/m² | ISO 179/1eA | |
23℃ (73℉) | *** kJ/m² | ISO 179/1eA | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ISO 75 | |
| Additional Information | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Fogging | |||
- | *** mg | DIN 75201 | 100 °C,16 h |
Volatile Organic Compounds | *** µgC/g | VDA 277 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
