Moplen RP5062H is random copolymer polypropylene for EPP applications which has good balance of stiffness and impact properties, good heat resistance and foaming stability. Moplen RP5062H meets requirements of EPP applications as uniformity of cell formation, foaming stability and dimentional stability.
Features: Bead foaming stability / Uniform cell size/ Dimensional stability/ Good EPP process ability
Market: Automotive/Compounds
Application: EPP beads for automotive and industrial & electronic packaging
| Original Document | Technical Datasheet-ASTM(English) | |||
| Features | Good StiffnessGood Impact ResistanceHeat ResistanceDimensional StabilityFoamable | |||
| Processing | Foam | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D 1505 | |
Melt Mass Flow Rate(MFR) | |||
230°C/2.16 kg | *** g/10min | ASTM D 1238 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Yield | *** kg/cm² | ASTM D638 | |
Tensile Elongation | |||
Yield | *** % | ASTM D638 | |
Flexural Modulus | *** kg/cm² | ASTM D790 | |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Izod Notched Impact Strengh | |||
23℃ (73℉) | *** kg·cm/cm | ASTM D256 | |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Rockwell R | *** R | ASTM D785 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ASTM D648 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
