Purell PE 3020D is a low density polyethylene with high rigidity, good opticals and good chemical resistance. It is delivered in pellet form. The grade is used by our customers for small blow mouldings including packaging of pharmaceuticals in blow fill seal technology and injection moulding for medical devices, closures and seals.
| Original Document | Technical Datasheet-ASTM(English) Technical Datasheet-ISO(English) | |||
| Features | High Stiffness/RigidityGood optical propertiesMedical Application/Health CareEtO sterilizableChemical Resistance | |||
| Appearance | Pellets/Granules | |||
| Processing | InjectionExtrusion Blow Molding | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Density/Specific Gravity | *** g/cm³ | ASTM D 1505 | |
Melt Mass Flow Rate(MFR) | |||
190℃/2.16 kg | *** g/10min | ISO 1133 | |
190℃/2.16 kg | *** g/10min | ASTM D1238 | |
Bulk(Apparent ) Density | *** g/cm³ | ISO 60 | |
Environmental Stress Cracking Resistance | *** Hours | ASTM D 1693 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** psi | ASTM D638 | 1% Secant |
Tensile Modulus | *** Mpa | ISO 527-1/-2 | |
Tensile Strength | |||
Yield | *** psi | ASTM D638 | |
Yield | *** Mpa | ISO 527-1/-2 | |
Break | *** psi | ASTM D638 | |
Tensile Elongation | |||
Break | *** % | ASTM D638 | |
Flexural Modulus | *** psi | ASTM D790 | 1% Secant |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore D hardness | *** D | ISO 868 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ASTM D648 | |
Vicat Softening Temperature(VST) | *** °C | ASTM D1525 | |
Vicat Softening Temperature(VST) | *** °C | ISO 306/A50 | |
Melt Temperature(Tm) | *** °C | ISO 3146 | DSC |
Processing Temperature | ***~*** °C | - | Extrusion |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
