Purell ACP 5231 D is a high density polyethylene with an excellent combination of stress crack resistance and stiffness. It is delivered in pellet form containing antioxidants and used by our customers for small blow moulding applications in the heathcare and diagnostics segment.
| Original Document | Technical Datasheet-ISO(English) | |||
| Features | Good StiffnessMedical Application/Health CareEtO sterilizableOxidation stabilityESCR | |||
| Processing | InjectionInjection Blow MoldingExtrusion Blow Molding | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Melt Mass Flow Rate(MFR) | |||
190℃/2.16 kg | *** g/10min | ISO 1133 | |
190℃/5 kg | *** g/10 min | ISO 1133 | |
190℃/21.6 kg | *** g/10 min | ISO 1133 | |
Bulk(Apparent ) Density | *** g/cm³ | ISO 60 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ISO 527-1/-2 | |
Tensile Strength | |||
Yield | *** Mpa | ISO 527-1/-2 | |
Tensile Elongation | |||
Yield | *** % | ISO 527-1/-2 | |
FNCT | *** hr | ISO 16770 | 3.5 MPa, 2% Arcopal, 80°C |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
-30℃ (-22℉) | *** kJ/m² | ISO 179 | |
Tensile Impact | *** kJ/m² | ISO 8256 | Notched |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore D hardness | *** D | ISO 868 | |
Ball Indentation Hardness | *** Mpa | ISO 2039-1 | H 132/30 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
