Petrothene NA362005 is a LDPE/EVA copolymer resin selected by customers for use in bag-in-box, heavy-duty skin packaging and other high strength, easy to seal packaging. NA362005 is also used in wire & cable applications. NA362005 exhibits high impact strength, good low temperature toughness and flexibility.
| Original Document | Technical Datasheet-ASTM(English) | |||
| Features | High ImpactHigh Impact at Low TemperaturGood FlexibilityCopolymer | |||
| Processing | Wire & Cable ExtrusionBlow MoldingExtrusion Blow Molding | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D 1505 | Base Resin Density, (23 °C) |
Melt Mass Flow Rate(MFR) | |||
190℃/2.16 kg | *** g/10min | ASTM D1238 | |
Vinyl Acetate | *** % | Internal | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Vicat Softening Temperature(VST) | *** °C | ASTM D1525 | |
| Film | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Break | *** Mpa | ASTM D 882 | MD |
Break | *** Mpa | ASTM D 882 | TD |
Tensile Elongation | |||
Break | *** % | ASTM D 882 | MD |
Break | *** % | ASTM D 882 | TD |
Elmondorf Tear | *** g | ASTM D 1922 | MD |
Elmondorf Tear | *** g | ASTM D 1922 | TD |
Secant Modulus | *** Mpa | ASTM D 882 | 1% Secant Modulus, MD |
Secant Modulus | *** Mpa | ASTM D 882 | 1% Secant Modulus, TD |
Dart Drop Impact | *** g | ASTM D 1709 | F50 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
