Microthene MP635662 is a high flow hexene LLDPE powder for the rotational molding of large hollow objects, including toys, playground equipment, drums and agricultural and chemical storage containers. This product exhibits excellent ESCR, low temperature impact strength and warp resistance. MP635662 is a UV-stabilized, 35-mesh powder and is also available in pellet form as Petrothene GA635662.
| Original Document | Technical Datasheet-ASTM(English) | |||
| Features | High Impact at Low TemperaturLow WarpageUV StabiltiyESCRChemical Resistance | |||
| Additive | UV-Stabilizer | |||
| Appearance | Powder | |||
| Processing | Rotational Molding | |||
| Compliance | FDA | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Melt Mass Flow Rate(MFR) | |||
190℃/2.16 kg | *** g/10min | ASTM D1238 | |
Environmental Stress Cracking Resistance | *** Hours | ASTM D 1693 | F50, 10% Igepal® |
Environmental Stress Cracking Resistance | *** Hours | ASTM D 1693 | F50, 100% Igepal® |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Yield | *** Mpa | ASTM D638 | |
Flexural Modulus | *** Mpa | ASTM D790 | 1% Secant |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Falling Dart Impact | *** J | Internal | -40°C, 3.18 mm |
Falling Dart Impact | *** J | Internal | -40°C, 6.35 mm |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ASTM D648 | Unannealed |
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ASTM D648 | Unannealed |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
