Lupolen GX 5038 is a new generation hexene linear high-density polyethylene for injection molding. Typical customer applications may include SCR reservoirs (SCR = Selective Catalytic Reduction) and components for automotive fuel tank applications. Lupolen GX 5038 is a pelletized polymer. It is not intended for use in medical and pharmaceutical applications.
| Original Document | Technical Datasheet(English) | |||
| Features | High Impact at Low TemperaturLow WarpageEasy processingESCRFuels ResistantHigh Flow | |||
| Appearance | Pellets/Granules | |||
| Processing | Injection | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Melt Mass Flow Rate(MFR) | |||
190℃/2.16 kg | *** g/10min | ISO 1133 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ISO 527-1/-2 | |
Tensile Strength | |||
Yield | *** Mpa | ISO 527-1/-2 | |
Tensile Elongation | |||
Yield | *** % | ISO 527-1/-2 | |
FNCT | *** hr | ISO 16770 | 6.0 MPa, 2% Arkopal N100, 50 °C |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Impact | *** kJ/m² | ISO 8256 | notched, type 1, method A, -30 °C |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Processing Temperature | ***~*** °C | - | Injection Moulding |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
