Lupolen 3026 H is an additivated, low density polyethylene. It contains slip agent. It is characterized by a good balance between processability and mechanical properties.
LyondellBasell customers report that films made from Lupolen 3026 H exhibit a glossy surface finish.
Lupolen 3026 H provides the option to produce films with very good optical properties.
It is delivered in pellet form.
This product is not intended for use in medical and pharmaceutical applications.
| Original Document | Technical Datasheet(English) | |||
| Features | Good optical propertiesLow Friction/WearEasy processingGood Heat Seal | |||
| Additive | Slip agent | |||
| Appearance | Pellets/Granules | |||
| Processing | Blow Molding | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Melt Mass Flow Rate(MFR) | |||
190℃/2.16 kg | *** g/10min | ISO 1133 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ISO 527-1/-2 | |
Tensile Strength | |||
Yield | *** Mpa | ISO 527-1/-2 | |
Coefficient of Friction | *** - | ISO 8295 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Vicat Softening Temperature(VST) | *** °C | ISO 306 | A/50 N |
Melt Temperature(Tm) | *** °C | ISO 3146 | |
Processing Temperature | ***~*** °C | - | Extrusion |
| Optical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Haze | *** % | ASTM D1003 | 50 µm |
Gloss | *** % | ASTM D 2457 | 20° |
Gloss | *** - | ASTM D 2457 | 60° |
| Film | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** Mpa | ISO 527-1/-3 | MD |
- | *** Mpa | ISO 527-1/-3 | TD |
Tensile Elongation | |||
Break | *** % | ISO 527-1/-3 | MD |
Break | *** % | ISO 527-1/-3 | TD |
Piercing strength | *** J/m | DIN 53373 | |
Dart Drop Impact | *** g | ASTM D 1709 | F50 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
