Lupolen 2427 K is an additivated, low density polyethylene. It contains an antioxidant, slip and anti-blocking agent. It is characterized by a good processability. Films made from Lupolen 2427 K exhibit good optical properties. It is delivered in pellet form.
This product is not intended for use in medical and pharmaceutical applications.
| Original Document | Technical Datasheet(English) | |||
| Features | Good optical propertiesLow Friction/WearEasy processingGood Heat SealOxidation stability | |||
| Additive | AntioxidantSlip agentAntiblock | |||
| Appearance | Pellets/Granules | |||
| Processing | Cast FilmBlow Molding | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Melt Mass Flow Rate(MFR) | |||
190℃/2.16 kg | *** g/10min | ISO 1133 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ISO 527-1/-2 | |
Tensile Strength | |||
Yield | *** Mpa | ISO 527-1/-2 | |
Coefficient of Friction | *** - | ISO 8295 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Vicat Softening Temperature(VST) | *** °C | ISO 306 | A/50 N |
Melt Temperature(Tm) | *** °C | ISO 3146 | |
Processing Temperature | ***~*** °C | - | Extrusion |
| Optical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Haze | *** % | ASTM D1003 | 50 µm |
Gloss | *** % | ASTM D 2457 | 20° |
Gloss | *** - | ASTM D 2457 | 60° |
| Film | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** Mpa | ISO 527-1/-3 | MD |
- | *** Mpa | ISO 527-1/-3 | TD |
Tensile Elongation | |||
Break | *** % | ISO 527-1/-3 | MD |
Break | *** % | ISO 527-1/-3 | TD |
Piercing strength | *** J/m | DIN 53373 | |
Dart Drop Impact | *** g | ASTM D 1709 | F50 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
