ICORENE® 1505 Black 9001 is a crosslinkable black high density polyethylene specifically developed for rotational moulding.
This grade is particularly suitable for use in applications requiring exceptional impact resistance at low temperature, toughness and excellent ESCR such as fuel tanks.
The original cross linking system used allows a perfect moulding of the part free of pinholes.
ICORENE® 1505 Black 9001 is TÜV approved, protocolnr 163XS0034-00.
| Original Document | Technical Datasheet-ASTM(English) | |||
| Features | High ImpactHigh Impact at Low TemperaturEasy processingUV StabiltiyESCRCrosslinkable | |||
| Additive | UV-Stabilizer | |||
| Appearance | PowderBlack | |||
| Processing | Rotational Molding | |||
| Compliance | TÜV | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D 1505 | |
Environmental Stress Cracking Resistance | *** Hours | ASTM D 1693 | 50°C, 10% Igepal |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Yield | *** Mpa | ASTM D638 | |
Tensile Elongation | |||
Break | *** % | ASTM D638 | |
Flexural Modulus | *** Mpa | ASTM D790 | |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Falling Dart Impact | *** J/cm | ASTM D4226 | -40°C |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ASTM D648 | Unannealed |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
