ICORENE® 1460 is a hexene medium density polyethylene specifically developed for use in rotational moulding.
This grade is designed for use in agriculture and chemical storage containers, technical parts and automotive parts. Also this grade is resisting against the harmful effect of biodiesel fuel.
ICORENE® 1460 has good overall mouldability, high ESCR and low temperature impact resistance.
| Original Document | Technical Datasheet(English) | |||
| Features | High Impact at Low TemperaturGood ToughnessMold ReleaseUV StabiltiyESCR | |||
| Additive | UV-Stabilizer | |||
| Appearance | PowderNatural Color | |||
| Processing | Rotational Molding | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D 1505 | |
Melt Mass Flow Rate(MFR) | |||
190℃/2.16 kg | *** g/10min | ASTM D1238 | |
Environmental Stress Cracking Resistance | *** Hours | ASTM D 1693 | 50°C, 100% Igepal |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ISO 527 | |
Tensile Strength | |||
Yield | *** Mpa | ISO 527-1 | |
Tensile Elongation | |||
Yield | *** % | ISO 527-1 | |
Break | *** % | ISO 527-1 | |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Impact | *** kJ/m² | ISO 8256 | -30°C |
Tensile Impact | *** kJ/m² | ISO 8256 | 23°C |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Vicat Softening Temperature(VST) | *** °C | ISO 306/A50 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
