ICORENE® 1314 is a high performance hexene high density polyethylene specifically developed for use in rotational moulding.
This grade has been designed for applications requiring good stiffness and toughness.
This material can be used in many different rotomoulding applications and for food contact applications.
ICORENE® 1314 Black 9001 is TÜV approved, protocolnr 175XS0122-00.
ICORENE® 1314 Natural and Black are DiBt approved Z40-25-519 and WRAS approved: 1507503 & 1202543
| Original Document | Technical Datasheet(English) | |||
| Features | Good StiffnessGood Impact ResistanceFood ContactUV StabiltiyESCR | |||
| Additive | UV-Stabilizer | |||
| Appearance | PowderNatural ColorBlack | |||
| Processing | Rotational Molding | |||
| Compliance | DiBtTÜVWRAS | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D 1505 | |
Melt Mass Flow Rate(MFR) | |||
190℃/2.16 kg | *** g/10min | ASTM D1238 | |
Environmental Stress Cracking Resistance | *** Hours | ASTM D 1693 | 50°C, 100% Igepal |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Yield | *** Mpa | ISO 527 | 23°C |
Tensile Elongation | |||
Break | *** % | ASTM D638 | |
Flexural Modulus | *** Mpa | ISO 178 | 23°C |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Falling Dart Impact | *** J/cm | Internal | -20°C |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore D hardness | *** D | ISO 868 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ISO 75-2/B | Unannealed |
Vicat Softening Temperature(VST) | *** °C | ISO 306/A | |
Melt Temperature(Tm) | *** °C | ISO 11357-3 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
