Hostalen QCP 5603 Ivory is a circular high density polyethylene grade supplied in pellet form for blow molding and extrusion applications. This grade is available in ivory color and characterized by its easy processing and colorability.
According with the requirements of Standard ISO 14021:2016, Hostalen QCP 5603 Ivory contains at least 98% of recycled material that is fully based on Post-Consumer Waste (PCW) from pre-sorted municipal plastic waste. Filtration level is 150 µm. Volatiles according to ASTM D6980 @ 120 °C are < 0.2%. Based on CIELab values, the color indication is close to RAL 9018.
This product is not intended for highly regulated applications including food contact, potable water contact, medical and pharmaceutical applications.
| Original Document | Technical Datasheet-ISO(English) | |||
| Features | High Stiffness/RigidityGood ColoringEasy processingOxidation stabilityRecycled Contained | |||
| Appearance | Pellets/GranulesIvory | |||
| Processing | ExtrusionBlow MoldingExtrusion Blow Molding | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Melt Mass Flow Rate(MFR) | |||
190℃/2.16 kg | *** g/10min | ISO 1133 | |
190℃/5 kg | *** g/10 min | ISO 1133 | |
Bulk(Apparent ) Density | *** g/cm³ | ISO 60 | |
Filled/Ash | *** % | ISO 3451 | 600 °C |
Post Consumer Recycled | *** % | Internal | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ISO 527-1/-2 | |
Tensile Strength | |||
Yield | *** Mpa | ISO 527-1/-2 | |
Tensile Elongation | |||
Yield | *** % | ISO 527-1/-2 | |
FNCT | *** hr | ISO 16770 | 6.0 MPa, 2% Arkopal N100, 50 °C |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
-30℃ (-22℉) | *** kJ/m² | ISO 179-1/1eA | Type 1, Notch A |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Processing Temperature | ***~*** °C | - |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
