"Hostacom" X M2 T20 is a 20% mineral filled, polypropylene copolymer for injection molding. It combines good stiffness/impact balance, good scratch resistance and low odor. The grade has been specifically designed for molding of automotive interior trim parts.
The grade is available in color-matched, pellet form.
| Original Document | Technical Datasheet-ISO(English) | |||
| Features | Good StiffnessGood Impact ResistanceAnti-ScratchLow OdorCopolymerFilled & Reinforced | |||
| Appearance | Pellets/GranulesColors Available | |||
| Processing | Injection | |||
| Reinforced | 20% Mineral | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Melt Mass Flow Rate(MFR) | |||
230°C/2.16 kg | *** g/10min | ISO 1133 | |
Mold Shrinkage | |||
- | ***~*** % | Internal | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ISO 527-1/-2 | Secant |
Tensile Strength | |||
Yield | *** Mpa | ISO 527-1/-2 | 50 mm/min |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
-30℃ (-22℉) | *** kJ/m² | ISO 179-1/1eA | Type 1, Edgewise, Notch A |
23℃ (73℉) | *** kJ/m² | ISO 179-1/1eA | Type 1, Edgewise, Notch A |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ISO 75-1/-2 | Unannealed |
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ISO 75-1/-2 | Unannealed |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
