"Hostacom" TBC 172N is a UV stabilised, 20 % mineral filled, impact modified polypropylene copolymer for injection moulding. It combines an excellent flowability with high stiffness/medium impact properties.
The grade has been specifically designed for moulding of large complex parts that require excellent low temperature ductility combined good dimensional stability, like instrument panels. The material is laser-scoreable.
The grade is available in custom colour, pellet form.
| Original Document | Technical Datasheet-ISO(English) | |||
| Features | High Stiffness/RigidityHigh ImpactHigh Impact at Low TemperaturToughened/Impact ModifiedDimensional StabilityLaser MarkableUV StabiltiyGood FlowCopolymerFilled & Reinforced | |||
| Additive | UV-StabilizerImpact Modifier | |||
| Appearance | Pellets/GranulesColors Available | |||
| Processing | Injection | |||
| Reinforced | 20% Mineral | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | Method A |
Melt Mass Flow Rate(MFR) | |||
230°C/2.16 kg | *** g/10min | ISO 1133 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Yield | *** Mpa | ISO 527-1/-2 | 50 mm/min |
Flexural Modulus | *** Mpa | ISO 178 | Secant |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
-30℃ (-22℉) | *** kJ/m² | ISO 179 | Type 1, Edgewise, Notch A |
23℃ (73℉) | *** kJ/m² | ISO 179 | Type 1, Edgewise, Notch A |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ISO 75-1/-2 | Unannealed |
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ISO 75-1/-2 | Unannealed |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
