Hostacom EBG 2063T BLACK is a 10% short glass fiber coupled PP with low flow. It is designed for applications requiring a high level of long term heat ageing.
The use of the new "Advanced Copo PP" resin provides a significantly higher mechanical durability under load at elevated temperatures due to much lower material deformation (creep) compared to existing PP Compounds.
The product is delivered in black color version. This is a preliminary datasheet subjected to changes after product industrialization.
This grade is not intended for medical, pharmaceutical, food and drinking water applications.
| Original Document | Technical Datasheet-ISO(English) | |||
| Features | DurabilityGood Heat AgingCreep ResistantHigh ViscosityFilled & Reinforced | |||
| Appearance | Black | |||
| Processing | Injection | |||
| Reinforced | 10% Glass Fiber | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | 23 °C |
Melt Volume Flow Rate(MVR) | |||
230°C/5.0 kg | *** cm³/10 min | ISO 1133 | |
Melt Mass Flow Rate(MFR) | |||
230°C/5 kg | *** g/10 min | ISO 1133 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ISO 527-1/-2 | 23 °C |
Tensile Strength | |||
Break | *** Mpa | ISO 527-1/-2 | 23 °C |
Tensile Elongation | |||
Break | *** % | ISO 527-1/-2 | 23 °C |
Flexural Modulus | *** Mpa | ISO 178 | 23 °C, Tech. A |
Flexural Strength | |||
- | *** Mpa | ISO 178 | 23 °C, Tech. A |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
-30℃ (-22℉) | *** kJ/m² | ISO 179-1/1eA | |
23℃ (73℉) | *** kJ/m² | ISO 179-1/1eA | |
Charpy Unnotched Impact Strengh | |||
23℃ (73℉) | *** kJ/m² | ISO 179-1/1eU | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ISO 75-1/-2 | Unannealed |
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ISO 75-1/-2 | Unannealed |
Vicat Softening Temperature(VST) | *** °C | ISO 306/B50 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
