Hiflex CA 7700 A is a reactor soft thermoplastic polyolefin (rTPO) , manufactured using the LyondellBasell proprietary Catalloy process technology and is stabilized with a standard additive package. The grade is available in natural colored pellet form. Hiflex CA 7700 A is designed for use in injection molding or extrusion compounds when good processability, optimum mechanical and good dimensional stability, are key properties. Thanks to its tailored elastomeric phase, Hiflex CA 7700 A features high softness and high toughness at very low temperature and provide high thermal characteristics. Hiflex CA 7700 A is used as a blending partner to improve the overall performances of durable and technical compounds. Hiflex CA 7700 A is highly compatible with a wide range of polyolefins and soft plastics. This grade can be either blended or co-extruded with other materials to provide the required property balance
| Original Document | Technical Datasheet-ISO(English) | |||
| Features | High Impact at Low TemperaturDimensional StabilityLow ShrinkageEasy processingWeather ResistanceSoft | |||
| Appearance | Pellets/GranulesNatural Color | |||
| Processing | InjectionExtrusionCo-extrusionCompounding | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | 23 °C, Method A |
Melt Mass Flow Rate(MFR) | |||
230°C/2.16 kg | *** g/10min | ISO 1133 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Yield | *** Mpa | ISO 527-1/-2 | |
Break | *** Mpa | ISO 527-1/-2 | |
Tensile Elongation | |||
Yield | *** % | ISO 527-1/-2 | |
Break | *** % | ISO 527-1/-2 | |
Flexural Modulus | *** Mpa | ISO 178 | |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
-40℃ (-40℉) | *** kJ/m² | ISO 179 | |
-20℃ (-4℉) | *** kJ/m² | ISO 179 | |
23℃ (73℉) | *** kJ/m² | ISO 179 | |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore D hardness | *** D | ISO 868 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ISO 75-1/-2 | Unannealed |
Vicat Softening Temperature(VST) | *** °C | ISO 306/A50 | |
Melt Temperature(Tm) | *** °C | ISO 11357-3 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
