Hifax TRS 123D NAT medium melt flow, 1000 MPa flexural modulus, natural, reactor grade thermoplastic elastomeric olefin (TEO) resin has an excellent balance of impact, stiffness, paintability, and processability that is typically used for all-terrain vehicle (ATV) components. It is based on material produced from LyondellBasell¶s proprietary Catalloy process.
| Original Document | Technical Datasheet-ISO(English) | |||
| Features | Good StiffnessHigh ImpactGood ColoringEasy processingGood PaintablilityMold ReleaseMedium viscosity | |||
| Appearance | Natural Color | |||
| Processing | Injection | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | 23 °C, Method A |
Melt Mass Flow Rate(MFR) | |||
230°C/2.16 kg | *** g/10min | ISO 1133 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Yield | *** Mpa | ISO 527-1/-2 | 23°C |
Tensile Elongation | |||
Yield | *** % | ISO 527-1/-2 | 23°C |
Flexural Modulus | *** Mpa | ISO 178 | 23 °C |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Instrumented Impact Energy | |||
-30℃ (-22℉)peak | *** J | ASTM D3763 | -30 °C, 2.2 m/s, 3.2 mm plaque |
Falling Dart Impact | *** J | ASTM D 5420 | Gardner Impact, (-30 °C, Geometry GC) |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
