HIFAX TKC 519X Black is a mineral reinforced, impact modified polypropylene copolymer for injection moulding.
It combines very high rigidity with a low coefficient of linear thermal expansion (CLTE) and very good processability for body panel applications. The grade has been specifically designed for moulding of large complex parts that require good dimensional stability.
| Original Document | Technical Datasheet-ISO(English) | |||
| Features | Good Impact ResistanceToughened/Impact ModifiedDimensional StabilityLow ShrinkageLow CLTEEasy processingGood PaintablilityCopolymerFilled & Reinforced | |||
| Additive | Impact Modifier | |||
| Appearance | Pellets/GranulesBlack | |||
| Processing | Injection | |||
| Reinforced | Mineral | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | 23°C |
Melt Mass Flow Rate(MFR) | |||
230°C/2.16 kg | *** g/10min | ISO 1133 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** Mpa | ISO 527-1/-2 | 23°C |
Flexural Modulus | *** Mpa | ISO 178 | |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Izod Notched Impact Strengh | |||
-30℃ (-22℉) | *** kJ/m² | ISO 180/1A | |
23℃ (73℉) | *** kJ/m² | ISO 180/1A |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
