| Original Document | Technical Datasheet-ASTM & ISO(Chinese&English) | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Melt Volume Flow Rate(MVR) | |||
200°C/5.0 kg | *** cm³/10 min | ISO 1133 | |
Melt Mass Flow Rate(MFR) | |||
200 ℃/5 Kg | *** g/10 min | ASTM D 1238 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** kg/cm² | ASTM D638 | 23℃ |
Tensile Modulus | *** Mpa | ISO 527 | |
Tensile Strength | |||
- | *** kg/cm² | ASTM D 638 | 23℃ |
- | *** Mpa | ISO 527 | |
Tensile Elongation | |||
- | *** % | ISO 527 | |
- | *** % | ASTM D 638 | 23℃ |
Flexural Modulus | *** kg/cm² | ASTM D790 | 23℃ |
Flexural Modulus | *** Mpa | ISO 178 | |
Flexural Strength | |||
- | *** kg/cm² | ASTM D790 | 23℃ |
- | *** Mpa | ISO 178 | |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Izod Notched Impact Strengh | |||
23℃ (73℉) | *** Kg·cm/cm | ASTM D256 | |
23℃ (73℉) | *** J/m | ISO 180 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
- | *** °C | ASTM D 648 | Annealed |
- | *** °C | ISO 75 | Annealed |
Vicat Softening Temperature(VST) | *** °C | ASTM D1525 | Annealed |
Vicat Softening Temperature(VST) | *** °C | ISO 306 | Annealed |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | |||
HB | *** mm | UL94 | NC |
| Additional Information | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Reidual Monomer | *** ppm | - |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
