| Original Document | Technical Datasheet-ASTM(Chinese&English) | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | 23℃ |
Melt Mass Flow Rate(MFR) | |||
200 ℃/5 Kg | *** g/10 min | ASTM D 1238 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** kg/cm² | ASTM D 638 | 1/8”,6 mm/min |
Tensile Elongation | |||
- | *** % | ASTM D 638 | 1/8”,6 mm/min |
Flexural Modulus | *** kg/cm² | ASTM D790 | 1/4”,2.8 mm/min |
Flexural Strength | |||
- | *** kg/cm² | ASTM D790 | 1/4”,2.8 mm/min |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Izod Notched Impact Strengh | |||
23℃ (73℉) | *** kg·cm/cm | ASTM D256 | 1/4″ |
23℃ (73℉) | *** kg·cm/cm | ASTM D256 | 1/8″ |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Rockwell M | *** M | ASTM D 785 | 1/4″ |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
- | *** °C | ASTM D 648 | Annealed |
- | *** °C | ASTM D 648 | Unannealed |
Vicat Softening Temperature(VST) | *** °C | ASTM D1525 | 1/8”,50℃/hr |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | |||
HB | *** mm | UL94 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
