| Original Document | Technical Datasheet(English) | |||
| Features | Wear/Abrasion ResistanceChemical ResistanceHigh Flow | |||
| Appearance | Pellets/GranulesNatural Color | |||
| Compliance | RoHSWEEE(EU 2002/96/EC) | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Break | *** Mpa | ASTM D 412 | |
Break | *** Mpa | ISO 37 | 1.90 mm |
at 100% strain | *** Mpa | ASTM D 412 | |
at 100% strain | *** Mpa | ISO 37 | 1.90 mm |
Tensile Elongation | |||
Break | *** % | ASTM D 412 | |
Break | *** % | ISO 37 | 1.90 mm |
Tear Strength | *** kN/m | ASTM D 624 | Die C, 24°C |
Compression Set | *** % | ASTM D 395 | 100°C, 22 hr |
Compression Set | *** % | ASTM D 395 | 24°C, 22 hr |
Compression Set | *** % | ISO 815 | 100°C, 22 hr |
Compression Set | *** % | ISO 815 | 24°C, 22 hr |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Brittleness Temperature | *** °C | ASTM D 746 | |
Brittleness Temperature | *** °C | ISO 812 | |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore A hardness | *** A | ASTM D 2240 | 1.90 mm, Compression Molded |
Shore A hardness | *** A | ISO 868 | 1.90 mm, Compression Molded |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
