Versollan™ RU 2205-1 is a high performance, injection moldable TPU alloy developed to offer a rubbery feel and appearance, reduced cycle times, and performance properties associated with TPUs.
Bonds to PC, ABS, PC/ABS, and Copolyester
Excellent Abrasion Resistance
Fast Set Up Rates During Processing
Matte Finish
Rubbery, Soft Touch Feel
Very Good Oil Resistance
| Original Document | Technical Datasheet(English) | |||
| Features | Low GlossWear/Abrasion ResistanceFast Cycle TimeGood AdhesionOil ResistantSoft | |||
| Appearance | Pellets/GranulesNatural Color | |||
| Processing | InjectionExtrusion | |||
| Compliance | RoHS | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Melt Mass Flow Rate(MFR) | |||
190℃/2.16 kg | *** g/10min | ASTM D1238 | |
200 ℃/5 Kg | *** g/10 min | ASTM D 1238 | |
Mold Shrinkage | |||
Flow | ***~*** % | ASTM D955 | |
Viscosity | *** Pa-s | ASTM D 3835 | Apparent Viscosity (200°C, 11200 sec^-1) |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Break | *** Mpa | ASTM D 412 | 23°C, Die C, 2 hr |
at 100% strain | *** Mpa | ASTM D 412 | 23°C, Die C, 2 hr |
at 300% strain | *** Mpa | ASTM D 412 | 23°C, Die C, 2 hr |
Tensile Elongation | |||
Break | *** % | ASTM D 412 | 23°C, Die C, 2 hr |
Tear Strength | *** kN/m | ASTM D 624 | |
Compression Set | *** % | ASTM D 395 | 23°C, 22 hr |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Brittleness Temperature | *** °C | ASTM D 746 | Thickness = 1.91mm, Conditioned for 40hrs at 23C at 50% RH |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore A hardness | *** A | ASTM D 2240 | 10 sec |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | |||
HB | *** mm | UL94 | 1.5mm for US and China; 3.0mm for Canada. |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
