AjiENG.com
Sign in | Register

Aji New Material (Qingdao) Co.,LTD

No.47 Huadingshan Road, Qingdao City, Shandong Province, China.
Tel: +86 532 86871530
Email: info@ajieng.com

Versollan™ OM 1255NX-9

TPE(TPR)

Avient (PolyOne)

Product Description

Versollan™ OM 1255NX-9 is a performance TPU alloy designed for thin wall overmolding onto polycarbonate (PC), ABS and PC/ABS substrates.

  • Improved Grip with Matte, Rubbery Finish

  • Superior Adhesion to PC, ABS, PC/ABS, PC/PBT and Copolyester

    General
    Original Document
    Technical Datasheet(English)
    Features
    Low Gloss
    Easy processing
    Good Adhesion
    Mold Release
    Appearance
    Pellets/Granules
    Black
    Processing
    Injection
    Compliance
    RoHS
    Specifications
    Physical Value/Unit(Sign in to View) Test Standard Test Condition

    Density/Specific Gravity

    		 *** g/cm³ ASTM D792

    Melt Mass Flow Rate(MFR)

    190℃/2.16 kg

    		*** g/10min ASTM D1238

    200 ℃/5 Kg

    		*** g/10 min ASTM D 1238

    Mold Shrinkage

    Flow

    		***~*** % ASTM D955

    Viscosity

    		 *** Pa-s ASTM D 3835
    Apparent Viscosity (200°C, 11200 sec^-1)
    Mechanical Value/Unit(Sign in to View) Test Standard Test Condition

    Tensile Strength

    Break

    		*** Mpa ASTM D 412
    23°C, Die C, 2 hr

    at 100% strain

    		*** Mpa ASTM D 412
    23°C, Die C, 2 hr

    at 300% strain

    		*** Mpa ASTM D 412
    23°C, Die C, 2 hr

    Tensile Elongation

    Break

    		*** % ASTM D 412
    23°C, Die C, 2 hr

    Tear Strength

    		 *** kN/m ASTM D 624

    Compression Set

    		 *** % ASTM D 395
    23°C, 22 hr
    Impact Value/Unit(Sign in to View) Test Standard Test Condition

    Brittleness Temperature

    		 *** °C ASTM D 746
    Thickness = 1.90mm, Conditioned for 40hrs at 23C at 50% RH
    Hardness Value/Unit(Sign in to View) Test Standard Test Condition

    Shore A hardness

    		 *** A ASTM D 2240
    10 sec
    Flammability Value/Unit(Sign in to View) Test Standard Test Condition

    Flame Rating

    HB

    		*** mm UL94

    The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.