Versaflex™ VDT 5110-50N is a vibration and impact damping TPE formulated to bond to polar resins including Polycarbonate (PC), ABS, PC/ABS, and Copolyester
| Original Document | Technical Datasheet(English) | |||
| Features | Good AdhesionAntivibration/damping | |||
| Appearance | Pellets/GranulesNatural Color | |||
| Processing | InjectionExtrusion | |||
| Compliance | RoHS | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Mold Shrinkage | |||
Flow | ***~*** % | ASTM D955 | |
Viscosity | *** Pa-s | ASTM D 3835 | Apparent Viscosity (200°C, 11200 sec^-1) |
Viscosity | *** Pa-s | ASTM D 3835 | Apparent Viscosity (200°C, 1340 sec^-1) |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Break | *** Mpa | ASTM D 412 | 23°C, Die C, 2 hr |
at 100% strain | *** Mpa | ASTM D 412 | 23°C, Die C, 2 hr |
at 300% strain | *** Mpa | ASTM D 412 | 23°C, Die C, 2 hr |
Tensile Elongation | |||
Break | *** % | ASTM D 412 | 23°C, Die C, 2 hr |
Tear Strength | *** kN/m | ASTM D 624 | |
Compression Set | *** % | ASTM D 395 | 23°C, 22 hr |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore A hardness | *** A | ASTM D 2240 | 10 sec |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
