Versaflex PKG 4190 Translucent is a translucent semi-hard plastomer made of thermoplastic elastomer and polyethylene, developed for capliner applications.
Versaflex PKG 4190 Translucent will give adhesion when melt pressed on lackered metal, provided the lacker is a modified grade for polyethylene adhesion.
| Original Document | Technical Datasheet(English) | |||
| Features | Good Adhesion | |||
| Appearance | Pellets/GranulesTranslucent | |||
| Processing | InjectionExtrusion | |||
| Compliance | RoHS | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Melt Volume Flow Rate(MVR) | |||
190°C/5.0 kg | *** cm³/10 min | ISO 1133 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Break | *** Mpa | DIN 53504 | 2.00 mm, 200 mm/min |
Tensile Elongation | |||
Break | *** % | DIN 53504 | 2.00 mm, 200 mm/min |
Compression Set | *** % | ISO 815 | 23°C, 72 hr |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore D hardness | *** D | DIN 53505 | 3 sec, 23°C |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
