Versaflex™ OM 6275-1 is specifically designed to bond to a variety of standard and modified nylon materials, including those which are glass-filled, heat stabilized and/or impact modified.
New Product. Commercial specifications have not been established.
Exceptional Colorability
Outstanding Adhesion in Both Two-Shot and Insert Molding Processes
Outstanding Adhesion in Both Two-Shot and Insert Molding Processes
Soft, Rubbery Grip
Very Easy to Process
| Original Document | Technical Datasheet(English) | |||
| Features | Good ColoringEasy processingGood AdhesionSoft | |||
| Appearance | Pellets/GranulesNatural Color | |||
| Processing | Injection | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Mold Shrinkage | |||
Flow | ***~*** % | ASTM D955 | |
Viscosity | *** Pa-s | ASTM D 3835 | Apparent Viscosity (200°C, 11200 sec^-1) |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Break | *** Mpa | ASTM D 412 | 23°C, Die C, 2 hr |
at 100% strain | *** Mpa | ASTM D 412 | 23°C, Die C, 2 hr |
at 300% strain | *** Mpa | ASTM D 412 | 23°C, Die C, 2 hr |
Tensile Elongation | |||
Break | *** % | ASTM D 412 | 23°C, Die C, 2 hr |
Tear Strength | *** kN/m | ASTM D 624 | |
Compression Set | *** % | ASTM D 395 | 23°C, 22 hr |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore A hardness | *** A | ASTM D 2240 | 10 sec |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
