Therma-Tech™ Thermal Management Compounds have been engineered to combine the heat transfer and cooling capabilities of metals with the design freedom, weight reduction and cost advantages of thermoplastics. These materials provide the benefits of proprietary conductive additive technologies and the performance of select engineering thermoplastic resins. Therma-Tech compounds have been shown to improve thermal conductivity up to 100-times that of conventional plastics and can be used in a wide range of thermal management applications.
| Original Document | Technical Datasheet(English) | |||
| Features | Thermal ConductiveFlame RetardantHalogen FreeElectrically Conductive | |||
| Appearance | Pellets/GranulesBlack | |||
| Processing | Injection | |||
| Compliance | RoHS | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ASTM D638 | 3.20 mm, 5.0 mm/min |
Tensile Strength | |||
- | *** Mpa | ASTM D 638 | 3.20 mm, 5.0 mm/min |
Tensile Elongation | |||
Break | *** % | ASTM D638 | 3.20 mm, 5.0 mm/min |
Flexural Modulus | *** Mpa | ASTM D790 | 3.20 mm, 5.0 mm/min |
Flexural Strength | |||
- | *** Mpa | ASTM D790 | 3.20 mm, 5.0 mm/min |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Izod Notched Impact Strengh | |||
- | *** J/m | ASTM D 256 | 3.20 mm |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Thermal Conductivity | ***~*** W/(m K) | ASTM E 1461 | In-Plane |
Thermal Conductivity | ***~*** W/(m K) | ASTM E 1461 | Through-Plane |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | |||
V-0 | *** mm | Internal | |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Surface Resistivity | ***~*** Ohm | ASTM D257 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
