Syncure™ systems are two part moisture crosslinkable compounds, is a UL bulletinized high strength, RoHS compliant highly flame retardant insulation compound. Graft resin component of this system has approximate shelf life of 6 months from the date of production. Please consult PolyOne for its use past 6 months.
| Original Document | Technical Datasheet(English) | |||
| Features | Flame RetardantOil Resistant | |||
| Appearance | Pellets/GranulesNatural Color | |||
| Processing | Extrusion Coating | |||
| Compliance | UL 44UL VW-1 | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Gel Content | *** % | ASTM D2765 | Crosslinked PE, Method B (NonReferee Test) |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Yield | *** Mpa | ASTM D638 | Type IV, 510 mm/min |
Tensile Elongation | |||
Break | *** % | ASTM D638 | Type IV, 510 mm/min |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore D hardness | *** D | ASTM D 2240 | |
Shore D hardness | *** D | ASTM D 2240 | 10 sec |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Deformation | *** % | UL 1581 | 131°C,500 g, 1hr |
UL Temperature Rating | *** °C | - | |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Oxygen Index | *** % | ASTM D 2863 | 1.91 mm |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Dielectric Constant(Permittivity) | |||
1MHz | *** - | ASTM D 150 | |
Dissipation Factor | |||
1MHz | *** E-4 | ASTM D150 | |
Dielectric Strength | *** kV/mm | ASTM D149 | |
| Aging | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength(Heat Aging) | *** % | - | 121°C, 1.91 mm, 336 hr, UL Standard |
Elonggation(Heat Aging) | *** % | - | 121°C, 1.91 mm, 336 hr, UL Standard |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
